Trolling Motor Accessories

Wiring and electrical components and accessories specifically for use with trolling motors.

Trolling Motor Transducer Bracket

Trolling Motor Transducer Bracket

PART #300

  • Allows transom transducer to be mounted on trolling motors.
  • Made of marine grade aluminum, black powder coated.
  • Fits transom transducers made by Lowrance, Eagle, Hummingbird, Bottom Line and Zercom.
  • Fits Minnkota and Motorguide trolling motors.

Header Carded.


12 Volt Marine Circuit Breaker with Automatic Reset

Marine Circuit Breaker

PART #340 – 40 Amp

PART #350 – 50 Amp

  • For installing trolling motor and winches.
  • Will automatically reset itself.
  • Better that a fuse which can blow and ruin a fishing trip.

Includes nuts, washers, mounting hardware and 8ga ring terminal.

Header Carded


36 Volt Circuit Breaker with Manual Reset

Marine Circuit Breaker

PART #360 – 60 Amp

  • For installing trolling motor and winches.
  • Will automatically reset itself.
  • Replaces a fuse which can blow and ruin a fishing trip.

12/24 Volt Marine Circuit Breaker With Manual Reset

Marine Circuit Breaker

PART # 1020 – 20 AMP
PART # 1030 – 30 AMP
PART # 1040 – 40 AMP
PART # 1050 – 50 AMP

  • For Installing trolling motors and electric winches.
  • Manual reset button is on housing.
  • Better than a fuse which can blow and ruin a fishing trip.
  • Includes keps nuts, mounting hardware and 8 gauge ring terminal.

Header Carded


Trolling Motor Quick Disconnect

Trolling motor Quick Disconnect

PART #400

  • 10-gauge heavy duty connectors.
  • For wiring trolling motor where a plug and socket can’t be used on small boats and canoes.

Header Carded


V-Groove Trolling Motor Plugs and Receptacles

PART #410

Trolling Motor Plug

Use with Part #415 Only

  • 2 Wire plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #415

Trolling Motor Receptacle

Use with Part #410 Only

  • 2 Wire receptacle.
  • 8-Gauge with butt connectors.

Header Carded

PART #420

Trolling Motor Plug

Use with Part #425 Only

  • 3 Wire plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #425

Trolling Motor Receptacle

Use with Part #425 Only

  • 4 Wire receptacle.
  • 8-Gauge, no butt connectors.

Header Carded

PART #430

Trolling Motor Plug

Use with Part #425 Only

  • 2 Wire Red Charger plug.
  • 10-Gauge with butt connectors.

Header Carded


OEM Retrofit Trolling Motor Plugs and Receptacles

PART #445

Trolling Motor Plug

Use with Part #455 Only

  • 3 Wire Male plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #455

Trolling Motor Receptacle

Use with Part #445 Only

  • 3 Wire female receptacle.
  • 8-Gauge with butt connectors.

Header Carded

PART #470

Trolling Motor Plug

Use with Part #475 Only

  • 2 Wire male plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #475

Trolling Motor Receptacle

Use with Part #470 Only

  • 2 Wire female receptacle.
  • 10-Gauge with butt connectors.

Header Carded

PART #485

Trolling Motor Plug

Use with Part #480 Only

  • 2 Wire female plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #480

Trolling Motor Receptacle

Use with Part #485 Only

  • 2 Wire male receptacle.
  • 10-Gauge with butt connectors.

Header Carded

PART #495

Trolling Motor Plug

Use with Part #490 Only

  • 3 Wire female plug.
  • 10-Gauge with butt connectors.

Header Carded

PART #490

Trolling Motor Receptacle

Use with Part #495 Only

  • 3 Wire male receptacle.
  • 8-Gauge with butt connectors.

Header Carded


Large Stainless Steel Clamp

Transducer Clamp

PART # 450 – Bulk

PART # 460

  • For installing puck transducers to trolling motors.
  • I.D. Minimum 2 5/8” to 4 1/2” Maximim.

Header Carded


Motor Mate The “Original” Quick Release

Trolling Motor Quick Release

PART # AP-700

  • Designed to fit Designed to fit Minnkota, Terrova, & Powerdrive V2 motors.
  • Unique design eliminates boat cover damage.
  • Easy On Easy Off mounting.
  • Exclusive locking feature to prevent theft.
  • Uses existing bolt holes.
  • Marine grade power coat finish.

Bagged with instructions and hardware.

Motor-Mate Shims

Trolling Motor Release Shims

PART #320

  • Nylon Spacers are installed between bow platform and base plate.
  • Elevates base plate so that trolling motor can clear gunnel.

4 per bag.